To the right is the bottom side of the flap which holds the T-handle tool set. We looked at every multi-tool on the market and they all have shortcomings such as reach, speed and access to fasteners from an angle. This is the best solution you'll find for doing field maintenance since it's based off of the sliding T-handle. Anyone who'se ever used a t-handle wrench will tell you they're extremely fast and efficient. The set contains the following:

• Sliding T-handle bar
• 6 " extension bar
• 6, 8, 10, 12, 14 mm 6-point sockets
• 4-8, 10 mm hex (allen) bits
• Small & medium phillips & flathead screwdriver sockets
• 30 degree pivot universal joint
• 1/4 to 3/8 socket adaptor
• Spark plug socket

We use it for everything from minor tasks such as adjusting handlebar mounts to removing carbs and changing spark plugs. The T-handle with a 6 mm socket works great for main jet changes. Add the extension, and you can use as a T-handle wrench to spin fasteners off quickly. Slide the T-handle to the end of the bar for maximum leverage.